My New Blog

Home Care Tips | Light Bulbs | Tacoma Real Estate

 
vSometimes, especially on exterior light fixtures, the glass bulb breaks away from the metal base. There is no best way to remove the base from the fixture, but here are several options. Before replacing an exterior light, purchase a higher quality bulb with a brass- plated or copper-plated base that will not rust. You could coat the threads with a special dielectric grease available at automotive stores. Dry lubricant, Permatex Anti-Seize, and Vaseline will also work. To remove the broken base, first make sure the power is off. Wear eye protection. Protect the immediate area from broken glass that may remain on the base. I like to use a needle nose pliers to grab the metal rim of the bulb and twist it. You can also jam the nose of the pliers into the base of the bulb to get a grip. Sometimes opening the pliers inside the metal threads will give you a grip. If all else fails, use the needle nose pliers to collapse the metal threads until you can remove them.
 
source: Rinehart Inspection Services
 
 

The Trey Affolter Team, Keller Williams Realty, always welcomes comments and is available to answer questions about Tacoma Real Estate and the surrounding cities within Pierce County Real Estate, South King County Real Estate, and North Thurston County Real Estate.  

253-222-6000

http://www.TreySellsHouses.com

Your Tacoma Real Estate Professional

Posted by Trey Affolter on April 21st, 2009 8:46 AMPost a Comment (0)
Recent Posts:
Archive:
My Favorite Blogs:
Sites That Link to This Blog:

Trey Affolter, Keller Williams Realty 615 east Pioneer Ave, Suite 203 Puyallup, WA 98372
Phone: Cell: Fax:

See Featured Homes

Copyright © 2012 Trey Affolter, Keller Williams Realty
Portions Copyright © 2012 a la mode, inc.
Another XSite by a la mode, inc. | Admin Login| Terms of Use| Site Map
All rate, payment, and area information are estimates and approximations only.



 
State:
County:
City:
Zip: